![]() Pushing a connector that actually doesn't fit or using excessive force could cause damage to the components on the motherboard or crack the motherboard itself. While this is an option you can try, we don't necessarily recommended it. It will be a tight fit and require a small bit of force to make the connector fit in place correctly. You can plug the 24-pin connector into the 20-pin motherboard connection without detaching or moving the additional 4 pins.There will be no need to detach or move the additional 4 pins. Electronics-Salon 24/20-pin ATX DC Power Supply Breakout Board Module. The adapter will connect to the 24-pin connector, converting it to a 20-pin connector, allowing you to connect it directly to the motherboard's 20-pin connection. Weastlinks DC-ATX 90W Mini ITX Inline Power Module Conversion Board 12V Low Power 20PIN Power Supply Module With Cable. a 6-pin AUX power connector recommended by V2.03 of the ATX Specification for motherboard’s requiring 250W or 300W supplies. a 4-pin +12V power connector required for all Pentium 4 processor-based systems. You can purchase a 24-pin to 20-pin adapter from a computer retailer. Power supply units can have up to three power connectors: a 20-pin main power connector the standard ATX power connector.Find the proper orientation and push down firmly until the connectors completely PIN 1fit. The power supply plugs are designed to fit these connectors in only one orientation. If the 24-pin power connector on your power supply does not allow the detachment of the 4 additional pins, you can still connect it to the motherboard's power connection one of two ways. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V, 4-pin EATX12V) These connectors are for ATX power supply plugs. The 8-pin setup is detachable into two blocks of (4+4) as you can see in my CORSAIR RM850X PSU connectors. Among all, the 8-pin setup is widely used these days and considered a standard. These extra pins supply additional power for higher-end motherboards. Coming to the pin configuration, the CPU power connector either has a 4-pin, 8-pin, (8+4) pin, or an (8+8) pin setup. The 4 additional pins can be left unplugged since they are not needed with motherboards with a 20-pin power connection. ATX 4-pin 12V Power Connector Pinout (ATX v2. By detaching the 4-pins or moving them out of the way, the connector becomes a 20-pin power connector. The ATX 4-pin power supply connector is a standard motherboard power connector used to provide +12 VDC to the processor voltage regulator. Detaching those pins should allow enough room for the connector to be plugged into the motherboard power connection. ![]() Thankfully, almost all 24-pin power connectors are designed so that four of the pins can be detached or moved out of the way. ![]() The work of this connector supplies power to the entire motherboard. However, some motherboards still feature a 20-pin ATX power connection. The largest power connector in SMPS is called a 20+4 pin ATX power connector. Almost all of the new power supplies used today feature a 24-pin power connector to connect to a computer motherboard. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |